8 December 2011

ho ho ho

Can't believe how long it has been since I have written a blog post. How time flies! I have been busy with City and Guild coursework and of course knitting. I knit up a few Christmas decorations this year. I found a nice wee pattern on ebay (UK). Its a Santa's head which can be stuffed or left open at the back so a sweet can be slipped in. The pattern is by the seller jojoknits, I knitted the hat on dpns tweaking the mini Santa hat ornament by Julie Kundhi. Here's a few photos of my Santas and hats..........

Better get on with some more Christmas knits as time is running out.
Bye, Ali

23 October 2011

planet necklace

I'm still easing myself gently into the wet felting. I saw a tutorial for making felt balls in the washing machine on the Painted Thread Projects blog. It has great instructions and plenty of photos. I decided to make balls to represent all of the planets continuing my "universe" theme for the City and Guilds course. They are approximately to scale and the correct colour.
For the rings of Saturn, I wet felted a small piece, cut a donut shape out and them free machined round it.
The world was a plain blue ball which I later needlefelted, land and clouds on to - not sure how geographically correct it is!

Unfortunately I lost Pluto somewhere, it must have rolled under the sitee or somewhere. I was going to make a mobile of the felted planets, but changed my mind and turned them into a necklace.

bye, ali

15 October 2011

felted bowls

The city and guilds classes have well and truly started. I'm doing felting this year. As I haven't done much actual wet felting I'm easing myself in gently with a bit of knitted felting. I liked the idea of the felted nesting bowls in the Alice Thelma blog. My theme for this year is the solar system, so I tried to make the bowls planet like. I knitted angelica into the black felting wool to add a bit of sparkle. When I washed the bowls in the washing machine, the black must have ran making the nice bright yellow and orange colour a bit muddy.....should have used a colour catcher in the wash. Ah well you learn by your mistakes.
It was a good pattern, the bowls fitted exactly inside one another.





bye, ali


7 October 2011

whoopie pie pattern

Ive just put a new pattern on - see below for a whoopie pie. Hope someone can make use of it. The two halves are knitted with dpns and the cream is made using i-cord technique. I read somewhere that the whoopie pie got its name for Amish men shouting "whoopie" when they found the delicious treat in their lunch box.......dont know if that's true or not, you can correct me if I'm wrong. Better get back to my city and guild stuff now - I'm doing felting and I'm relatively new to this craft, so lots of research and googling required,
Bye, Ali.

WHOOPIE PIE
THIS PATTERN IS COPYRIGHT PROTECTED. DO NOT REPRODUCE PATTERN. DO NOT SELL ITEMS KNITTED FROM THIS PATTERN FOR PROFIT ONLY FOR PERSONAL OR CHARITABLE USE
 
size : 4 inches / 10cms wide


ABBREVIATIONS
k : knit
st(s) : stitch(es)
rpt : repeat
rd : round
tog : together
kfb : increase – knit into the front and back of the same stitch
pwt : pull wool through – cut yarn and with needle thread through remaining sts


MATERIALS
four dpns size 3.00mm (US 2.5)
two dpns recommended size 6.5mm (US 10.5)
brown double knit (8ply) yarn
white double knit (8ply) yarn
polyester stuffing
stitch marker
sewing thread and needle
darning needle
long sharp needle
seed beads (optional)
SEED BEADS NOT SUITABLE FOR SMALL CHILDREN


CAKE INSIDE HALF (make 2)
four dpns size 3.00mm (US 2.5)
Cast on 80 sts
Divide sts between three needles – 24 sts, 24 sts and 32 sts. Place marker.
Rd 1 :  k.
Rd 2 :  (k6, k2tog) rpt to end of rd (70 sts).
Rd 3 :  k.
Rd 4 :  (k5, k2tog) rpt to end of rd (60 sts).
Rd 5 :  k.
Rd 6 :  (k4, k2tog) rpt to end of rd. (50 sts).
Rd 7 :  k.
Rd 8 :  (k3, k2tog) rpt to end of rd. (40 sts).
Rd 9 :  k.
Rd 10 : (k2, k2tog) rpt to end of rd. (30sts)
Rd 11 : k.
Rd 12 : (k1, k2tog) rpt to end of rd (20 sts).
Rd 13 : k.
Rd 14 : (k2tog) rpt to end of rd (10 sts)
pwt.


CAKE HALF (make 2)
four dpns size 3.00mm (US 2.5)
Cast on 80 sts.
Divide sts between three needles – 24 sts, 24 sts and 32 sts. Place marker.
Rd 1 :  k.
Rd 2 :  k.
Rd 3 :  (k6, k2tog) rpt to end of rd. (70 sts).
Rd 4 :  k.
Rd 5 :  k.
Rd 6 :  (k5, k2tog) rpt to end of rd. (60 sts).
Rd 7 :  k.
Rd 8 :  (k4, k2tog) rpt to end of rd. (50 sts).
Rd 9 :  k.
Rd 10 : (k3, k2tog) rpt to end of rd. (40sts)
Rd 11 : k.
Rd 12 : (k2, k2tog) rpt to end of rd (30 sts).
Rd 13 : k.
Rd 14 : (k1, k2tog) rpt to end of rd (20 sts)
Rd 15 : k.
Rd 16 : (k2tog) rpt to end of rd (10 sts).
pwt.


CREAM FILLING
Recommended size of needle is 6.5mm (US 10.5)
Cast on 4 sts.
Using i-cord technique, continue until work measures aprox 100cms (40ins)
pwt leave a long yarn tail for sewing up.
If using different size needles to the ones suggested measure the icord by swirling round one of the halves, knit enough to double up on the outside edge.



 To Assemble
1. Weave yarn ends away on the wrong side of the cake halves.
Right side for the inside half is the knit side
Right side for the cake half is the reverse side – the side which looks like purl.
Place the two pieces together, wrong sides touching. Line up the decreasing stitches of the two pieces. With sewing thread in a matching colour sew round the edge, with running stitches


2. Leave a gap of approximately 2 inches. Insert stuffing. DO NOT OVERSTUFF. Keep cake half flatish. Sew closed the gap.


3. Swirl round the icord on one of the halves. With a long sharp needle, use the yarn tail to sew in place. Double up the icord at the edge.


4. Place the top half of the whoopie pie on top of the cream. With a sewing thread in a matching colour attach the edge of the cake half to the cream.
5. Seed beads can be sewn round the cream to represent sprinkles.


©copyright Alison Hogg 2010. For personal use only







5 October 2011

whooooopie pie

A friend came home from America and was telling me that whoopie pies where the new cupcakes. To be honest I had never heard of them but recently I have become more aware of them sneaking their way into the shops over here. I bought a couple to try and of course had to get the needles out. So the pattern will be available soon on my blog if you're interested in knitting up some.

Bye,
Ali

2 October 2011

new pattern

I've been having computer problems recently, but I have just got myself back online. I'm taking the opportunity to release a new pattern - Little Ladies, a mini doll pattern.

The dolls are 6 inches high and would make a good stocking filler or item for a party bag. They knit up in no time. The pattern also includes instructions for the four different fabric outfits, summer dress, bride, princess and fairy. Ive just put the pattern on my etsy and folksy shops.
Must catch up now with all my favourite blogs.
Bye, Ali

10 September 2011

wee hat

When a new baby arrives, I always like to knit some wee thing. I found a ball of essentials merino, in the loveliest colour of pink in my stash. There was just enough to knit into a baby hat. I used the Simply Simone and Simple Simon pattern by Elizabeth A Cote. Its available as free download on Ravelry.
Instead for making loops at the top of the hat, I just knotted the i-cord.


 For someone who tends to use acrylic yarns due to price and choice of colour, the yarn was an absolute delight to work with. So thats one less ball in my stash.  I must not, must not, must not buy anymore yarn.......well one more ball wont do any harm!
At the moment I am working on a mini doll pattern - she measures 6 inches long.

I havent had as much fun in a long time creating and making outfits for her. Here she is as a bride....
Im at the writing up stage at the moment, but hopefully the pattern will soon be for sale on my etsy / folksy shop.
Thats all for now, Ali


22 August 2011

beach combing

I spent a nice morning on the beach, the purpose of the mission was to find some tumbled beach glass.
I did a jewellery course during the summer and we were shown how to do wire work. The tutor suggested using beach glass or pebbles and wrap wire round them. She said that beach glass would be a scare commodity in the future, due to recycling and the more frequent use of plastic containers. I collected lots of "gems", some really interesting pottery pieces and glass with patterns and letters on them....
Now I just have to get the pliers out.
All the best, Ali.

3 August 2011

Apologies

Sorry if anyone has been trying to access my patterns in the last few days. I closed down the blog due to a problem, shall we say, with the site allfreeknitting. One of my patterns was held up in a controversial way on one of their newsletters and readers where invited to make comments. Some of the comments were most unpleasant about the pattern and I felt as if I was under personal attack. I now have my free patterns and profile removed from that site. Designers please note that on the allfreeknitting site you do not have a way of moderating or deleting comments about your patterns or indeed yourself.
Bye, Ali

26 July 2011

leaf quilt

I saw this 24 Leaf Quilt on Marion Boddy-Evan's blog and loved the simplicity of the design. The tree also reminded me of a lime tree I have in my back garden. Today I have just finished my own quilt based on her design. The tree trunk is a tweed material. I have also included a blue tit and a grey squirrel in the design as they are both frequent visitors to my back garden. Not sure about the blue leaves though, I thought they were a good idea at the time, to coordinate with the blue leaf patterned curtains in the hall. Not sure about the squirrel either, I think his head is too small- but just glad to have it finished.
Here it is.....

and some details of the quilt.....



Bye, Ali.

12 July 2011

miaooooow


I spent a nice day working in the garden on the cat for my new pattern. Still have to write it up mind you. I like the idea of combining the crafts of sewing and knitting and the use of fabric and yarn. The cat has fabric inner ears and will have fabric paws. I'm also hoping to include a pattern for a fabric dress and possibly a knitting pattern for a cardi.
All at the very early stages and it is very much work in progress. I'm hoping to have it finished at the end of the summer...hopefully that is!
Bye, Ali

9 July 2011

beaded cuff


I had a free afternoon today and decided I would make up a bracelet which I saw in the Annahilt bead shop.
Ive written up the instructions for anyone who would like to have a go.
what you need
-50 (aprox) coloured safety pins
-selection of beads with holes large enough to thread on to the pin of the safety pin
-beads for spacers with holes big enough to thread onto the elastic
-elasticity (1.0), which is a soft flexible bead cord which looks like nylon but is stretch like elastic  - about 3/4 metre
-nail varnish or glue
Instructions
1. Thread beads on the open pin of the safety pin.


2. Using half of the elasticity, thread the safety pins and spacers alternatively.
The safety pins are threaded head to toe, that is, the first pin has the closure at the top, the next pin has bottom side at the top. Make sure the beaded pin is facing forward. Use a paper clip at one end to stop beads and pins sliding off. If you have a reel of elasticity work directly from the reel.
3. Continue in this way. Check to see you have enough safety pins and beads to go around your wrist. Use an even number of safety pins to continue with the "head" to "toe" sequence. 



4. Place the safety pins on a flat surface, beaded side facing down. Thread the other piece through the other side of the bracelet adding a spacer bead between each safety pin.


5. Tie one end of the bracelet with a reef or square knot. For a tutorial on how to tie this knot click here.

6. Repeat for the other end of the bracelet.
7. Put a dab of glue or clear nail varnish on the knots for extra security and trim ends. Push knot into the hole of the safety pin.






5 July 2011

soooooo cute

At the moment I am writing up a pattern for a knitted cat. However progress is very slow and my enthusiasm has waned somewhat. For a wee break I knitted up some baby bunnies, a pattern by Laura Long, which is in her book Knitted Toy Tales. They book is absolutely delightful and I like the way she uses fabric. Sometimes its nice just to follow someone elses pattern and interesting to see how they do things.

25 June 2011

to bead or not to bead

Yesterday I spent a very enjoyable morning at the Bead Shop in Annahilt. I have signed up for a jewellery course during the summer holidays and wanted to stock up on some supplies. Not only can you choose beads for a vast selection, the girl (I think shes called Lynne) will help you design and make your item of jewellery. I strongly recommend a visit, you will come away with a unique and inexpensive piece of jewellery. Don't be put off by the mundane surroundings of the Business Centre where the shop is located - inside it's a completely different world. They is opening another shop in Bessbrook, near Newry in the Richbrook Industrial Estate, come 16th August. I bought a few wee bags of beads to make up in the course, but I'm sure I'll be back to the shop again soon. Bye , ali

21 June 2011

rain stops play

Why is it when the badminton net goes up in the back garden for the summer months - the rain comes on! Not to worry, I managed to take a few photos when the garden was bathed in sunshine last week. The rose was the first of this year.. I love the way the geranium spills over into my ladies mantle plant in a chaotic manner.... Some good news is, I passed my two City and Guilds Awards this year with distinction - I'm very pleased and relieved about that. Bye, Ali

13 June 2011

wish me luck

Tomorrow is the day when the external examiner comes to Belfast to mark the City and Guild pieces. She will be looking at my knitted items in particular - I have cupcakes, a gateau and these plate of buns up for scrutiny.

....so keep your fingers crossed for me.
After gaining the Certificate and hopefully a few Awards, I have signed up for the City and Guilds diploma for next year.
On a slightly different theme someone passed the link to this article
in the Daily Mail which links quilting to good health.
Ill let you know how I get on tomorrow,
Ali

21 May 2011

new pattern

I like to knit some things for my son now and then. As he is into all things army and inspired by the Mills Bomb pattern by A Butta, found on Ravelry, I decided to make up my own pattern for a knitted grenade. It is nice and soft for chucking indoors and has a removable pin. The grenade is knitted using round and flat knitting techniques. So if you don't like using double pointed needles, then this pattern is not for you. There is sewing involved, so if you don't like seaming, then this pattern is not for you. Due to its size, making up is quite fiddley, so if you don't like fiddley, then this pattern is not for you. So if there is anyone left and fancy having a go, Id love to hear how you find the pattern. Happy Knitting, ali.

GRENADE


THIS PATTERN IS COPYRIGHT PROTECTED. DO NOT REPRODUCE PATTERN. DO NOT SELL ITEMS KNITTED FROM THIS PATTERN FOR PROFIT ONLY FOR PERSONAL OR CHARITABLE USE

 
Materials
double pointed needles – 3.00mm (US size 3)
double knitting yarn (8ply) – green & grey
grey sewing thread & sewing needle
tapestry needle
drinking straw
polyester toy stuffing
sewing machine (optional)
 
Abbreviations
pwt - pull wool through (thread the yarn through the remaining stitches and pull tight to fasten)
 
GRENADE CHAMBER 4 dpns (3.00m / US 3)
Cast on 6 sts in green yarn.
Divide sts evenly between the three needles.
Rd 1 : k.
Rd 2 : kfb into each st (12 sts).
Rd 3 : k.
Rd 4 : kfb into each st (24 sts).
Rd 5 : k.
Rd 6 : (k1, kfb) rpt to end of rd (36 sts).
Rd 7: k.
Rd 8 : (k4, p2) rpt to end of rd.
Rds 9 – 11 : rpt Rd 8 - three times.
Rd 12 : (k3, kfb, p2) rpt to end of rd (42 sts).
Rd 13 : (p5, k2) rpt to end of rd.
Rd 14 : k.
Rd 15 : (p5, k2) rpt to end of rd.
Rd 16 : (k5, p2) rpt to end of rd.
Rd 17 - 20 : rpt Rd 16 – 4 times.
Rd 21 : (p5, k2) rpt to end of rd.
Rd 22 : k.
Rd 23 : (p5, k2) rpt to end of rd.
Rds 24 – 28 : rpt Rds : 16 – 20.
Rd 29 : (k1, k2tog) rpt to end of rd (28 sts).
Rd 30 : k.
Begin to stuff grenade.
Rd 31 : (p2tog) rpt to end of rd (14 sts). Break off green yarn and join grey yarn.
Next 5 rds : k.
Rd 37 : p.
Add more stuffing, push down with finger or knitting needle until grenade feels firm.
Rd 38 : (k2tog) (7 sts).
Rd 39 : k. pwt (see the Abbreviations above)
 
PIN two needles(3.00m / US 3)
Cast on 5 sts in grey yarn
Work stocking st until work measures 3.5cms /1.25ins
starting with a k row and ending with a p row.
Cast off knitwise.
With knit side facing up pick up 4 sts along the side.
 

Continue with i-cord until cord measures10cms /4ins. pwt.
 
HANDLE two needles (3.00m / US 3)
Cast on 7 sts in grey yarn.
ROW 1 : k.
ROW 2 : p to end of row.
Continue with another 8 rows starting with a k row and ending with a p row.
ROW 11 : p.
ROW 12 : p.
Continue with stocking st for another 10 rows starting with a k row and ending with a p row.
ROW 23 : sl1, k1, psso, k to last 2 sts, k2tog (5 sts).
ROW 24 : p.
Continue with stocking st for another 4 rows starting with a k row and ending with a p row.
ROW 29 : sl1, k1, psso, k1, k2tog (3 sts).
ROW 30 : p.
Continue with stocking st for another 4 rows starting with a k row and ending with a p row.
ROW 35 : p. MID POINT
ROW 36 : p.
Continue with stocking st for another 4 rows starting with a k row and ending with a p row.
ROW 41 : kfb, kfb, k1 (5 sts).
ROW 42 : p.
Continue with stocking st for another 4 rows starting with a k row and ending with a p row.
ROW 47 : kfb, k2, kfb, k1 (7 sts).
ROW 48 : p.
Continue with stocking st for another 10 rows starting with a k row and ending with a p row.
NEXT ROW : p.
NEXT ROW : p.
Continue with stocking st for another 10 rows starting with a k row and ending with a p row.
Cast off.
 
Assembling Grenade
My preferred method of seaming knitted pieces of this size is to use a sewing needle and sewing thread in a matching colour.
Pin - Cut two pieces of a drinking straw 2.5cms / 1inch long.
Slice one of the pieces lengthwise and insert inside the other straw.
With the end yarn of i-cord, join the end of the cord to the base of the i-cord to form a loop.
Place straw inside knitted rectangle and sew side seams with sewing thread and ends to enclose straw.
 

Channel for pin - Fold the handle piece to form a double layer. Sew a seam at the top just before the purl row. Use a sewing machine for this seam or backstitch. Go over the seam two or three times for extra strength. Leave a gap of about 2cms/ 0.75ins (to insert the pin) and sew a similar line of stitches. See photo below - sew the two seams along the two red lines. The channel / gap for the pin to be inserted, is between the two red lines
 

Sew round the edge of the handle, with sewing thread, leaving a gap at the channel where the pin is to be inserted.
Attach the handle to the top of the grenade.
Sew a few stitches halfway down the handle attaching it to the grenade chamber.
copyright protected Alison Hogg 2011

7 May 2011

dont get mad get even

 

I haven't been feeling too good this week - so I thought I would focus my efforts on typing up this fun project - a voodoo doll pincushion. Nothing sinister intended, just a bit of fun. I'm not sure how practical it is though!
As always I welcome feedback and comments about any of my patterns.
Bye Ali

VOODOO DOLL PINCUSHION 

THIS PATTERN IS COPYRIGHT PROTECTED. DO NOT REPRODUCE PATTERN. DO NOT SELL ITEMS KNITTED FROM THIS PATTERN FOR PROFIT ONLY FOR PERSONAL OR CHARITABLE USE


Casting on - 2 methods are used - single cast on method and cable method.
For instructional videos see Knitting Help
increase – knit front and back into same stitch
 
Materials
needle size 2.75mm (US size 2)
white double knitting yarn (light worsted yarn)
safety pin or stitch holder
polyester toy stuffing
embroidery thread, novelty yarn, ribbon, buttons etc for hair & features white felt

DOLL (2.75mm needles) (make 2)
Cast on 7 sts using cable cast on method, with white yarn.
Pull first stich tightly for each row.
ROW 1 : kfb1, k to last 2 sts, kfb1, k1 (9 sts).
ROW 2 : p.
Rpt ROWS 1 & 2 until 15 sts ending on a ROW 1.
ROW 8 : p.
ROW 9 : k.
ROW 10 : p.
ROW 11 : sl1, k1, psso, k to last 2 sts, (k2tog) (13 sts).
ROW 12 : p.
Rpt ROWS 11 & 12 until 5 sts remain ending on a ROW 11.
ROW 20 : p. Do not turn work, cast on 8 sts using single cast on method (13 sts).
ROW 21 : k. Do not turn work, cast on 8 sts using single cast on method (21 sts).
ROW 22 : p.
ROW 23 : kfb1, k to last 2 sts kfb1, k1 (23 sts).
ROW 24 : p.
ROW 25 : k.
ROW 26 : p.
ROW 27 : sl1, k1, psso, k to last 2 sts (k2tog) (21 sts).
ROW 28 : p.
Cast off 4 sts purlwise, k to end of row (17 sts).
Cast off 4 sts knitwise, p to end of row (13 sts).
Continue with 6 rows stocking st starting with a k row and ending with a p row.
NEXT ROW : k 6 sts, place the remaining 7 sts onto a stitch holder. NEXT ROW : p.
Continue with stocking stitch for 6 rows starting with a k row and ending with a p row.
NEXT ROW : sl1, k1, psso, k2, ( k2tog) (4 sts).
NEXT ROW : p.
Cast off, purlwise, leaving a long yarn tail.
Return to 7 sts on stitch holder, place on knitting needle, join yarn.
NEXT ROW : sl1, k1, psso, k to end of row (6 sts).
NEXT ROW : p.
Continue with stocking stitch for 6 rows starting with a k row and ending with a p row.
NEXT ROW : sl1, k1, psso, k2, (k2tog) (4 sts).
NEXT ROW : p.
Cast off purlwise, leaving a long yarn tail.
 
To Assemble Voodoo Doll
Gently press the two knitted pieces.

Place a circular piece of white felt for backing behind the face and embroider or sew buttons for features.

Place the two pieces together, knit side facing out. With the yarn ends bind together the two pieces using overcast stitch. Start at the feet and end at the “shoulders”.
Stuff the feet, body and arms. Insert small amounts of stuffing at a time, pushing into the arms and legs with a finger or knitting needle. Stuff firmly.



Continue sewing round the head, stuffing as you go.
Thread the yarn for hair through the edge of the head.

Sew heart button or felt shape to body.
 

copyright ALISON HOGG 2011